Now you can correct your slice without sacrificing any distance. That's because the all New MACTEC NVG2 Draw 460 Driver is equipped with some of the same technology as the MACTEC NVG2 Driver, but also has two large Tungsten weights in the sole that move the CG deep and toward the heel for moderate spin, high launch and a slice-correcing draw bias.
Fujikura Quadra Action Graphite Shaft
Made for golfers who want a friendly draw bias and ungodly distance even on mis-hits
Cup Face 360ยบ technology
Dual Tungsten Weighting
Light Crown Structure
MacGregor Mactec NVG2 Draw 460 Driver user reviews
Good Driver
3/17/2008
Handicap 0 - 5
This driver has a good feel (not great) and does fly with some draw enhancement. Distance seems pretty good and I really like the looks of the head.
Mike (Fruit Heights, UT)
Frequently asked questions about MacGregor Mactec NVG2 Draw 460 Driver
Q
05/31/2009 11:46 AMAnonymous
Hello,
I understand most drivers come in a 10.5 and 9.5 degree loft. I use a 10.5. When teeing off, my ball usually has a lot of loft and goes really high in the air, should I switch to a 9.5 degree
A
06/03/2009 6:33 AMGolfballs.com Employee: Johnny
Thank you for your question.
Is it worth testing out? Absolutely. Will the 9.5 give you a more penetrating ball flight is the question. Most golfers would kill to have more hang time but I know how you feel. I was in the same boat at one time and tested different lofts much like you. I ended up staying with the higher loft though. I would test it prior to officially making a move.
Play Well,
Johnny
my avg swing speed is about 80 to 90 . what would be the best Shaft Flex for me
A
05/25/2009 8:53 AMGolfballs.com Employee: Johnny
Thank you for your question.
You would fall in the 'Regular' flex category based upon your swing speed.
Please let me know if you have any other questions.
Thank you,
Johnny
A
06/15/2009 3:17 AMLow Handicap Golfer: Jamie
You're definitely a regular flex
Senior flex starts from 70-80
Regular is from 80 to about 100
Stiff 100 to 115ish
X-stiff 115+
I have used the YS-6 shaft in the 905T and the FT-i with pretty good success. Can you name me a couple other shafts that you think would give me the same "feel" and control? Thanks.
A
05/26/2009 1:42 PMGolfballs.com Employee: Andy
Thank you for your inquiry. There are a few other brands that have similar weight and launch profiles of the Graphite Design YS series. You should notice that the Aldila NVS 65, the Graphalloy ProLaunch 65, the UST V2 67, and the Fujikura E360 are all very comparable.
A
06/28/2009 10:34 PMMid Handicap Golfer: alfred
i have the graphalloy prolaunch 65 and it works great!is is very flexible.
My avg club speed was measured to be 108 mph , should I be looking at a extra stiff shaft
A
02/24/2009 2:00 PMGolfballs.com Employee: Andy
That clubhead speed is considered to be high enough for an extra stiff. Typically speaking, anyone who can swing their driver 105+ should be in extra stiff.
Great Question. Everything is subjective to your swing though. Do you tend to swing slower or more quickly? The rule of thumb is that if your swing speed is slower than 95mph then you should probably get a regular flex driver and if your swing is over 100mph then you should probably get a stiff flex driver. That leaves a little grey area that you from 95 to 100 where you can use either flex.
I hope this helps.
You will receive a response in appoximately 1 business day. if you provided an email address, you will receive a copy of the answer via email. Your question may be posted on this page when answered.
Email A Friend
If you would like to email this product to a friend, just fill out the form below. You have an option of including a message if desired.
